
Chapter 39: Ping-Pong Delay 235
Chapter 39: Ping-Pong Delay
Ping-Pong Delay is an AudioSuite plug-in that
adds a controllable delay to the original audio
signal. Use the Ping-Pong delay to add spatial-
ization, and panned echo to audio material. This
plug-in feeds back delayed signals to their oppo-
site channels, creating a characteristic ping-
pong echo effect.
Ping-Pong Delay Controls
The Ping-Pong Delay plug-in provides the fol-
lowing controls:
Gain
Adjusts the input volume of the Ping-Pong
Delay to prevent clipping or to increase the level
of the processed signal.
Mix
Adjusts the balance between the effected
signal and the original signal and controls the
depth of the effect. Mix is adjustable from 0% to
100%.
Delay
Sets the delay time between the original
signal and the delayed signal. The higher the set-
ting, the longer the delay. This control is adjust-
able from 0–1500 milliseconds (1.5 seconds).
Low Pass Filter
Controls the cutoff frequency of
the low pass filter. Use this to attenuate the high
frequency content of the feedback signal. The
lower the setting, the more high frequencies are
removed from the feedback signal.
The range of the Low Pass Filter is 20 Hz to
19.86 kHz, with a maximum value of Off (which
effectively means bypass).
Feedback
Controls the amount of feedback ap-
plied from the output of the delay into its input.
It also controls the number of repetitions of the
delayed signal.
Cross-Feedback
Cross-Feedback feeds the de-
layed signals to their opposite channel: The left
channel delay is fed to the right channel input
and vice-versa. The result is a stereo echo that
ping-pongs back and forth between the right
and left channels.
Ping-Pong Delay plug-in
The Ping-Pong Delay plug-in was formerly
called D-fx Ping-Pong Delay. It is fully com-
patible with all settings and presets created
for D-fx Ping-Pong Delay.
Comentarios a estos manuales